FP10000QSP   LAB GRUPPEN FP10000Q SP AMPLIFIER – £4,750.00
A New Benchmark For Touring Amplification Over the past decade, the tight and transparent sound of Lab.gruppen touring amplifiers has earned the praise of renowned FOH engineers and leading sound rental companies worldwide.
FP 10000Q, the flagship four-channel model of new the FP+ Series, continues this tradition. At the core of the FP 10000Q’s performance is the patented Class TD output stage, a breakthrough amplifier topology that approaches the exceptional efficiency of class D while retaining the sonic purity of proven class A/B designs. Further contributing to the remarkable efficiency of the FP 10000Q is a Regulated Switch Mode Power Supply (R.SMPS), which gives the added benefit of stabilizing rail voltages to the output even with wide fluctuations of mains voltage. A highly refined and updated circuit layout optimizes the interaction of R.SMPS and Class TD to produce the extraordinary power density of the FP 10000Q.
To keep its cool under extreme demands, the FP 10000Q relies on Lab.gruppen’s proprietary Intercooler®. This innovation uses thousands of copper fins to multiply the exposed heatsink surface’s rapid heat dissipation. Also, all output devices are mounted transverse to the airflow for uniform cooling. As a result, the FP 10000Q delivers Lab.gruppen’s’ trademark “all the power, all the time” with no degradation of sonic performance.
To maximize headroom in any application, the FP 10000Q offers adjustable input gain along with Lab.gruppen’s exclusive Voltage Peak Limiter (VPL). Adjustable on a per-channel basis, VPL optimizes the output for any load, from a single massive subwoofer to a series of HF compression drivers.
The comprehensive warning and protection features on the FP 10000Q safeguard output circuits and connected loads while also extending amplifier life and minimizing chance of service interruptions.
Whether it’s a matter of faulty wiring, improper use, or extreme ambient temperatures, the FP 10000Q gives clear indication of any problems. Automatic protection measures engage only at critical thresholds. Operating conditions are checked every six seconds and, if a fault is detected, normal operation is resumed when measurements return to nominal.
The FP 10000Q is shipped with a NomadLink® network interface as standard. In conjunction with DeviceControl software, NomadLink® allows monitoring of all key amplifier parameters and remote control of power on/off, channel mutes, and channel solo functions.
(NomadLink® requires the separate NLB 60E NomadLink Bridge and Network Controller).

• Very high power and channel density
The four-channel FP 10000Q delivers a total of 10000 W (4 x 2500 W @ 2 ohms) in only 2U.

• Four-channel flexibility
Four channels in one cabinet increases efficiency, flexibility and value in powering monitor systems, line arrays, and bi- or tri-amped systems. Adjacent channels bridgeable for 2- or 3-channel operation.

• Lab.gruppen sound quality
FP 10000Q amplifiers maintain the impeccable sonic performance standards set by the original fP Series, with the same durability and even greater efficiency.

• NomadLink® network ready
Monitoring and control of key functions accessible via the intuitive DeviceControl software and the robust, daisy-chained NomadLink network.

• Patented Class TD amplifier topology
Road-proven output stage delivers Class A/B audio quality with Class D efficiency

• Regulated Switch Mode Power Supply (R.SMPS)
Output power remains constant even with significant drops in the mains voltage.

• Efficient cooling system
Unique, lightweight Intercooler® copper cooling system dissipates more heat to allow extended peak output

• Adjustable parameters
Selectable Gain, scalable Voltage Peak Limiter (VPL), and bridge-mode operation allow custom configuration for any system or application.

• XLR input connectors

• Heavy duty binding post or Speakon output connectors

• Comprehensive protection and warning
Excessive output current, DC, temperature, very high frequency (VHF), short circuit, open load, mains fuse protection, and soft start.

> Click here for Technical Data

FP6000QSP   LAB GRUPPEN FP6000Q SP AMPLIFIER – £4,125.00
A New Benchmark For Touring Amplification Over the past decade, the tight and transparent sound of Lab.gruppen touring amplifiers has earned the praise of renowned FOH engineers and leading sound rental companies worldwide.
FP6000Q, the flagship four-channel model of new the FP+ Series, continues this tradition. At the core of the FP6000Q’s performance is the patented Class TD output stage, a breakthrough amplifier topology that approaches the exceptional efficiency of class D while retaining the sonic purity of proven class A/B designs. Further contributing to the remarkable efficiency of the FP6000Q is a Regulated Switch Mode Power Supply (R.SMPS), which gives the added benefit of stabilizing rail voltages to the output even with wide fluctuations of mains voltage. A highly refined and updated circuit layout optimizes the interaction of R.SMPS and Class TD to produce the extraordinary power density of the FP6000Q.
To keep its cool under extreme demands, the FP 10000Q relies on Lab.gruppen’s proprietary Intercooler®. This innovation uses thousands of copper fins to multiply the exposed heatsink surface’s rapid heat dissipation. Also, all output devices are mounted transverse to the airflow for uniform cooling. As a result, the FP6000Q delivers Lab.gruppen’s’ trademark “all the power, all the time” with no degradation of sonic performance.
To maximize headroom in any application, the FP6000Q offers adjustable input gain along with Lab.gruppen’s exclusive Voltage Peak Limiter (VPL). Adjustable on a per-channel basis, VPL optimizes the output for any load, from a single massive subwoofer to a series of HF compression drivers.
The comprehensive warning and protection features on the FP6000Q safeguard output circuits and connected loads while also extending amplifier life and minimizing chance of service interruptions.
Whether it’s a matter of faulty wiring, improper use, or extreme ambient temperatures, the FP6000Q gives clear indication of any problems. Automatic protection measures engage only at critical thresholds. Operating conditions are checked every six seconds and, if a fault is detected, normal operation is resumed when measurements return to nominal.
The FP6000Q is shipped with a NomadLink® network interface as standard. In conjunction with DeviceControl software, NomadLink® allows monitoring of all key amplifier parameters and remote control of power on/off, channel mutes, and channel solo functions.
(NomadLink® requires the separate NLB 60E NomadLink Bridge and Network Controller).

• Very high power and channel density
The four-channel FP6000Q delivers a total of 6000 W (4 x 1500 W @ 2 ohms) in only 2U.

• Four-channel flexibility
Four channels in one cabinet increases efficiency, flexibility and value in powering monitor systems, line arrays, and bi- or tri-amped systems. Adjacent channels bridgeable for 2- or 3-channel operation.

• Lab.gruppen sound quality
FP6000Q amplifiers maintain the impeccable sonic performance standards set by the original fP Series, with the same durability and even greater efficiency.

• NomadLink® network ready
Monitoring and control of key functions accessible via the intuitive DeviceControl software and the robust, daisy-chained NomadLink network.

• Patented Class TD amplifier topology
Road-proven output stage delivers Class A/B audio quality with Class D efficiency

• Regulated Switch Mode Power Supply (R.SMPS)
Output power remains constant even with significant drops in the mains voltage.

• Efficient cooling system
Unique, lightweight Intercooler® copper cooling system dissipates more heat to allow extended peak output

• Adjustable parameters
Selectable Gain, scalable Voltage Peak Limiter (VPL), and bridge-mode operation allow custom configuration for any system or application.

• XLR input connectors

• Heavy duty binding post or Speakon output connectors

• Comprehensive protection and warning
Excessive output current, DC, temperature, very high frequency (VHF), short circuit, open load, mains fuse protection, and soft start.

> Click here for Technical Data