PA12CP
£1,129.00
12 input 1kW powered console
The PA12-CP are sturdy, "walk up and
go" powered mixers, guaranteed to deliver loads of
weighty power from their 'Constant Power' amplifiers. These
well thought-out mixers offer operational flexibility for
any live sound situation and engineers of any experience.
|
|
>
CLICK FOR A LARGER IMAGE |
|
| Features |
Mono
Inputs
8 mono channels with Mic [XLR] & Line [TRS] inputs.
Line input overrides the XLR input. Individual +48V phantom power
switches are provided. New padless two-stage preamp with smooth
gain law. Line input goes to second stage for better matching
and performance. Switched 100Hz high pass filter. Insert point.
4 band EQ. 4 aux mixes. Mute with LED. PFL button with LED [functions
as peak indicator]. 100mm fader.
>
Back to top |
| |
4
Band EQ
Shelving
LF [60Hz], and HF [12kHz]. Fixed LM [250Hz], and swept HM [300Hz
- 6kHz]. The fixed 250Hz control has been carefully selected to
provide reduction of ‘muddy’ sounds and enhance ‘warmth’.
>
Back to top |
| |
Dual
Stereo Channels
Two
stereo channels with two unbalanced stereo inputs on each. One
is RCA one is TRS jack. Independent gain controls provide source
mixing in the channel strip. The top inputs [RCA] can be switched
direct to L&R instead of the channel strip providing extra
returns. Two band shelving EQ. 4 aux mixes. Stereo balance, mute
with LED, PFL with LED, and 100mm fader as mono channels.
>
Back to top |
| |
4
Auxiliary Sends
From all channels: 2 pre-fade for
foldback mixes - these have 100mm fader masters, mute switch with
LED, AFL with LED, and TRS outputs [can be routed internally to
output section]. 1 post-fade aux mix for FX - this feeds the internal
FX and has a TRS jack output for external FX. 1 post-fade aux
mix to TRS jack output is provided for external FX or special
feeds.
>
Back to top |
| |
Mix
Outputs
Main
stereo mix output has 100mm fader control & mute with LED.
TRS jack outputs. Mono sum output with level control with switch
for subwoofer mode to TRS jack. Record output [RCA] analogue +
SPDIF switchable pre/post fader. Twin 12 segment LED bar meter
shows program [or PFL /AFL]. Insert points on TRS jack for external
processing. Output EQ and routing to internal amplifiers / external
systems is provided.
>
Back to top |
| |
Output
EQ
4 band semi-parametric
EQ is provided in the output section, this affects the TRS slave
outputs, and the internal constant power amplifiers. This offers
more control than graphic equalisers for precise management of
speakers, especially foldback / monitors. Source selector allows
output EQ section to be used on Left / right, L&R sum / foldback1,
or foldback1 / foldback2.
>
Back to top |
| |
Constant
Power Amplifiers
1kW
i.e. 2 x 500W RMS peak power professional class AB power amplifiers
built in. Unique ALLEN&HEATH design gives full output into
4 OR 8 ohms [rear switch selector]. Output is to locking Speakon™
connectors. Thermal management twin fan system. Full protection
- input limiter to prevent clipping, short circuit protection,
current limit and DC fault sensing. LED indication of: signal
presence, peak warning, speaker protect and temperature. AB amp
input TRS break-jacks [normalised to output section / slave out
jacks] allow independent use of the power amplifiers if desired.
Standby mode switch puts amplifier into protect with speakers
isolated.
>
Back to top |
| |
Digital
FX
16 program digital
FX processor provides reverbs, delays, chorus and others, inc
combined. This FX module takes its feed from the post-fade FX
aux on the mono & stereo channels. The output of the FX module
is controlled by a 100mm fader with mute & PFL and is routed
to the stereo mix and FB1&2 with post fade level controls.
At this point, 2 TRS inputs with level control provide a way of
combining external FX with the internal unit. Internal FX unit
can be switched off to use external only if preferred. A footswitch
TRS jack is provided to mute the FX channel.
>
Back to top |
| |
Master
Section
Background music BGM mode - plays 2 track input into the main
mix post fader, allows user to pull down fader (whilst patching,
taking a break, or during walk-in) and leave music playing through
the amplifiers / speakers. 2 track input [RCA] with level control
to L&R - feeds headphone monitor selector [checking recording].
Twin, 3 colour 12 segment LED meter displays active monitor source.
Large LED indicates PFL / AFL active - signal overrides L&R
/ 2TRK monitor source selection. Standby switch uses relays to
disconnect the speakers. 2 track output [RCA] analogue + SPDIF
allows direct to digital recording. Switchable pre / post master
L&R fader. Mono sum out with level [TRS] - mode switch to
provide sub feed with 100Hz low pass filter. Phones out [TRS]
with level.
>
Back to top |
| |
PSU
Solid & reliable internal PSU. 1600W design.
>
Back to top |
| |
Lamp
4-pin XLR socket
>
Back to top |
| |
|
Connections
| INPUTS
|
| Mono
IN |
XLR |
balanced |
2k
ohm |
-62
to +5dBu |
| |
TRS
jack |
balanced,
tip+ |
>30k
ohm |
-26
to +10dBu |
| Stereo
A1 |
RCA
phono |
Unbalanced |
|
-10dBu
to off |
| Stereo
B2 |
TRS
jack |
Unbalanced,
tip hot |
|
-10dBu
to off |
| 2-track
return |
RCA
phono |
Unbalanced,
tip hot |
>10k
ohm |
0dBu,
+20dBu max |
| INSERTS |
| Channel
inserts |
TRS
jack |
tip
send, ring return |
|
0dBu
|
| LR
insert |
TRS
jack |
tip
send, ring return |
|
0dBu
|
| OUTPUTS |
| LR,
Mono, AB |
TRS
jack |
ground
compensated, tip+ |
|
0dBu |
| Aux,
FX, FB1, FB2 |
TRS
jack |
ground
compensated, tip+ |
|
0dBu |
| 2-track
out |
RCA
phono |
Unbalanced
tip |
|
|
| Headphones |
TRS
jack |
Tip
L, Ring R |
<30
ohm |
|
| SPDIF
out |
RCA
phono |
Transformer
isolated digital |
|
|
|
| |
PA20CP
£1,379.00
20 input
1kW powered console.
The PA20-CP are sturdy, "walk up and go" powered
mixers, guaranteed to deliver loads of weighty power from
their 'Constant Power' amplifiers.
These well thought-out mixers offer operational flexibility
for any live sound situation and engineers of any experience.
|
|
>
CLICK FOR A LARGER IMAGE |
|
| Features |
Mono
Inputs
16 mono channels with Mic [XLR] & Line [TRS] inputs. Line
input overrides the XLR input. Individual +48V phantom power switches
are provided. New padless two-stage preamp with smooth gain law.
Line input goes to second stage for better matching and performance.
Switched 100Hz high pass filter. Insert point. 4 band EQ. 4 aux
mixes. Mute with LED. PFL button with LED [functions as peak indicator].
100mm fader.
>
Back to top |
| |
4
Band EQ
Shelving LF [60Hz],
and HF [12kHz]. Fixed LM [250Hz], and swept HM [300Hz - 6kHz].
The fixed 250Hz control has been carefully selected to provide
reduction of ‘muddy’ sounds and enhance ‘warmth’.
>
Back to top
|
| |
Dual
Stereo Channels
Two
stereo channels with two unbalanced stereo inputs on each. One
is RCA one is TRS jack. Independent gain controls provide source
mixing in the channel strip. The top inputs [RCA] can be switched
direct to L&R instead of the channel strip providing extra
returns. Two band shelving EQ. 4 aux mixes. Stereo balance, mute
with LED, PFL with LED, and 100mm fader as mono channels.
>
Back to top |
| |
4
Auxiliary Sends
From all channels: 2 pre-fade for
foldback mixes - these have 100mm fader masters, mute switch with
LED, AFL with LED, and TRS outputs [can be routed internally to
output section]. 1 post-fade aux mix for FX - this feeds the internal
FX and has a TRS jack output for external FX. 1 post-fade aux
mix to TRS jack output is provided for external FX or special
feeds.
>
Back to top |
| |
Mix
Outputs
Main
stereo mix output has 100mm fader control & mute with LED.
TRS jack outputs. Mono sum output with level control with switch
for subwoofer mode to TRS jack. Record output [RCA] analogue +
SPDIF switchable pre/post fader. Twin 12 segment LED bar meter
shows program [or PFL /AFL]. Insert points on TRS jack for external
processing. Output EQ and routing to internal amplifiers / external
systems is provided.
>
Back to top
|
| |
Output
EQ
4 band semi-parametric
EQ is provided in the output section, this affects the TRS slave
outputs, and the internal constant power amplifiers. This offers
more control than graphic equalisers for precise management of
speakers, especially foldback / monitors. Source selector allows
output EQ section to be used on Left / right, L&R sum / foldback1,
or foldback1 / foldback2.
>
Back to top
|
| |
Constant
Power Amplifiers
1kW i.e. 2 x 500W
RMS peak power professional class AB power amplifiers built in.
Unique ALLEN&HEATH design gives full output into 4 OR 8 ohms
[rear switch selector]. Output is to locking Speakon™ connectors.
Thermal management twin fan system. Full protection - input limiter
to prevent clipping, short circuit protection, current limit and
DC fault sensing. LED indication of: signal presence, peak warning,
speaker protect and temperature. AB amp input TRS break-jacks
[normalised to output section / slave out jacks] allow independent
use of the power amplifiers if desired. Standby mode switch puts
amplifier into protect with speakers isolated.
>
Back to top
|
| |
Digital
FX
16 program digital
FX processor provides reverbs, delays, chorus and others, inc
combined. This FX module takes its feed from the post-fade FX
aux on the mono & stereo channels. The output of the FX module
is controlled by a 100mm fader with mute & PFL and is routed
to the stereo mix and FB1&2 with post fade level controls.
At this point, 2 TRS inputs with level control provide a way of
combining external FX with the internal unit. Internal FX unit
can be switched off to use external only if preferred. A footswitch
TRS jack is provided to mute the FX channel.
>
Back to top
|
| |
Master
Section
Background music BGM mode - plays 2 track input into the main
mix post fader, allows user to pull down fader (whilst patching,
taking a break, or during walk-in) and leave music playing through
the amplifiers / speakers. 2 track input [RCA] with level control
to L&R - feeds headphone monitor selector [checking recording].
Twin, 3 colour 12 segment LED meter displays active monitor source.
Large LED indicates PFL / AFL active - signal overrides L&R
/ 2TRK monitor source selection. Standby switch uses relays to
disconnect the speakers. 2 track output [RCA] analogue + SPDIF
allows direct to digital recording. Switchable pre / post master
L&R fader. Mono sum out with level [TRS] - mode switch to
provide sub feed with 100Hz low pass filter. Phones out [TRS]
with level.
>
Back to top |
| |
PSU
Solid & reliable internal PSU. 1600W design.
>
Back to top |
| |
| Lamp
4-pin XLR socket.
>
Back to top
|
| |
| |
|
