Powerwerks Tower PA Speaker with Bluetooth® ~ 50W

SKU: PW505BT

RRP:
£189

This lightweight full range personal PA system features two 5" Eminence® speakers with a high frequency driver, multiple inputs, phanto power, and balanced XLR outputs.

Specifications
Output Power
50W

Accepted Inputs
Channels 1 and 2: Mic XLR, Line level 1/4" Un-balanced

Hum and Noise

-65 dB: Residual noise, all level controls at 0% (minimum)
-48 dB Nominal system noise, all level controls at 50%

System Gain (Measurements made at 1 kHz)
+70 dB: Mic to speaker output (Channel 1 and 2)
+56 dB: Line to speaker output (Channel 1 and 2)
+42 dB AUX IN to speaker output

Channel EQ (High, low)
4 kHz and above, 800 Hz and below

Powerlink (In and OUT)
Both jacks accept a balanced input and sends a pre-master volume output mix of channels.
Recommended use. Linking two PW505BT units together

Subwoofer Out
Line out, 200 Hz-150 Hz

Phantom Power
+15, Mic inputs (Channel 1 and 2)

Power Requirements
Europe: 230VAC/50 Hz, 80 W Nominal
UK: 230VAC/50 Hz, 80 W Nominal


Speakers
2 x 5", 25 W 16 Ohm each

Horn
3.5" piezo driver

Power Capacity
50 W, RMS

Frequency Response
60 Hz - 20 kHz, Full range (subwoofer jack not used)
150 Hz - 20 kHz, Crossover active ( 1/4" mono plug in subwoofer jack )

Nominal Impedance
Not designed for external speakers

Bluetooth® Module Features
Bluetooth® 3.0+EDR compliant Typical +2 dBm Class 2 output power Audio DAC 94 dB SNR A2DP profile support

Top Hat Speaker Connector: 35mm / 1 3/8" diameter

Dimensions
7.2" W x 18.8" H x 7.3" D
192mm W x 478mm H x 185mm D

Weight
16 lbs
7.2 kg

Downloads


About Powerwerks

Powerwerks P.A. systems and speakers are designed in the USA to deliver high-quality audio, useful 'real world' features and rugged, reliable performance. This quality is due in part to the combined experience of the Powerwerks engineers, which totals more than 100 years in the biz.

You may also like

Recently viewed