GraphTech TUSQ XL Slotted Nut 6 String 7.5" Radius

New
SKU: PQL-5072-00

RRP:
£13.49

If you have a Fender® guitar or re-issue from the 1950's-60's or 70's, this is your nut!

A 7.25" radius, work with a curved or flat bottom and permanently lubricated for great tuning stability.  It works in both a flat bottom or curved bottom nut slot due to its ingenious design, just sand off the tab for a curved bottom.

It is pre-slotted to make for a quick and easy install.

For just about all Fender® electric guitars made in the 1950’s, 60’ and 70’s… that’s a lot!

The 7.25” fingerboard radius originated in the early 1950s and was used for most Fend® electric instruments until the 1980s. In the 80's it was changed to a slightly flatter 9.5" radius. 

Measurements
Length 43.18mm / 1.7"
Width 3.3mm / 0.13"
Height 5.41mm / 0.213"
E t0 E 35.31mm / 1.390"

TUSQ XL is designed to boost guitar tone and performance. This precision engineered nut is made with a specially formulated material which couples the strings' vibrations to the neck and brings out the hidden harmonics and richness in every note. It is based on the highly resonant TUSQ man made ivory, but is impregnated with PTFE to improve the tuning performance of the guitar.


About GraphTech

Graph Tech is renowned around the world for producing some of the most innovative and reliable nuts, saddles, bridge pins, bridges and pickup systems and are used on some of the biggest names in the guitar world. Through patented methods and proprietary techniques, Graph Tech has designed specific tone and performance enhancements that were once impossible to achieve.

You may also like

Recently viewed